Table of Contents
Advertisement
AXIS Q60 Series
Additional settings
2. Click Upload new clip.
3. Browse to locate your audio clip and click Done.
Create a rule:
1. Open the device webpage for the camera.
2. Go to Settings > System > Events.
3. Go to Recipients and add a recipient.
3.1 Go to the device webpage of the speaker that has the audio clip stored on its SD card.
3.2 Copy a link to the audio clip.
3.3 Return to the device webpage of the camera.
4. Go to Rules and add a new rule:
4.1 Under Condition, select Video motion detection.
4.2 Under Action, select Send notification through HTTP.
Record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
Turn on shock detection:
1. Go to Settings > System > Detectors.
2. Turn on shock detection, and set a value for the shock sensitivity.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Device status, select Shock detected.
4. Click + to add a second condition.
5. In the list of conditions, under Scheduled and recurring, select Scheduled event.
6. In the list of schedules, select After hours .
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/58173#t10114259
17
Advertisement
Table of Contents
