Input Menu; Computer 1: Rgb/Component /Rgb (Scart); Computer 2: Rgb; Hdmi - Panasonic PT-VW431DE Operating Instructions Manual

Input menu

Select [Input] from the Main Menu (see
"Navigating through the menu" on page 35),
then select the item from the sub-menu.
Remote Control
Computer 1: RGB/Component
/RGB (Scart)
Projects the image of [Computer 1] input.
1 ) Press ▲▼ to select [Computer 1].
2 ) Press ► to access the submenu.
3 ) Press ▲▼ to select [RGB],
[Component] or [RGB(Scart)] and then
press the <ENTER> button.
Note
When the Input Search function is set to [On 1] or
z
[On 2] in the Auto setup function, the input signal will be
searched automatically.
The [System] cannot be selected when selecting [RGB
z
(Scart)].

Computer 2: RGB

Projects the image of [Computer 2] input.
Press ▲▼ to select [Computer 2 (RGB)]
and then press the <ENTER> button.
Note
When [Monitor out] is selected in the [Terminal] of
z
the setting menu, [Computer 2(RGB)] can not be
selected. Pressing <COMPUTER 2> button on the
remote control displays [Monitor out].

HDMI

Projects the image of [HDMI] input.
Press ▲▼to select [HDMI] and then press
the <ENTER> button.
38
- ENGLISH
Control Panel

Video

Projects the image of [Video] input.
Press ▲▼ to select [Video] and then
press the <ENTER> button.

S-video

Projects the image of [S-video] input.
Press ▲▼ to select [S-video] and then
press the <ENTER> button.

DIGITAL LINK

Projects the image of [DIGITAL LINK] input.
Press ▲▼ to select [DIGITAL LINK] and
then press the <ENTER> button.

System

[System] is displayed below the sub menu.
1 ) Press ▲▼ to select [System] and then
press ► or the <ENTER> button to
access the submenu.
2 ) Press ▲▼ to select the desired system
and then press the <ENTER> button.
For computer input
J
When there is no input signal
compatible with the signal from
a connected computer on the
projector, the automatic PC
adjustment function works and
Auto
[Auto] is displayed on the system.
If images are not being correctly
projected, manually adjust the
settings to suit your computer
and register in [Store].
There is no input signal from the
computer.
- - - -
Check the connections.
Displays the mode registered
Mode 1-
with [Store] in [PC adjust].
Mode 10
Note
For the supported signals of the projector, see "List
z
of compatible signals". ( Æ pages 92-95)