Adjusting Front Adjustable Feet; Adjusting The Position By Using The Vertical Lens Shift; Function - Panasonic PT-VW431DE Operating Instructions Manual

Adjusting front adjustable feet

Lift the front of the projector and press the feet lock latches on both side of the projector.
Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height and tilt.
You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contract
them.
(You can adjust the projection angle vertically.)
Attention
Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
z
the front adjustable feet.
If keystone distortion occurs on the projected image, perform "KEYSTONE" from the "Screen" menu. (
z
Note
Screw up the adjustable feet, and an audible click will be heard as the limit.
z
Adjusting the position by using the vertical lens shift function
If the projector is not positioned right in front of the center of the screen, you can adjust the vertical position of
projected image by moving the vertical lens ring within the shift range of the lens.
Lens shift adjustment
„
The display position can be shifted
upward up to 48% elevation of the
display. (When turn the vertical lens shift
ring to the right (left), the display moves
up (down)).
Attention
Please note the followings when using the projector.
Do not touch the lens while it is moving as this could cause injury to the fingers.
z
Never allow children to touch the lens.
z
Setting up
Feet Lock Latches
Adjustable range
Front adjustable feet : 48.5 mm (1.909")
Æ page 48)
Lens shift adjustable range
48%
Shift range
Lens shift center
position
ENGLISH -
23