Troubleshooting - Philips 6912231PH User Manual

Content
E S . . . . . . . . . 1 0
E N . . . . . . . . . . 2
F R . . . . . . . . . . . 3 PT..........11
D E . . . . . . . . . . 4 I T. . . . . . . . . 1 2
N L . . . . . . . . . . 5 E L . . . . . . . . . 1 3
NO..........6 TR.........14
DA . . . . . . . . . . 7 C S . . . . . . . . . 1 5
S V. . . . . . . . . . 8 P L . . . . . . . . . 1 6
F I . . . . . . . . . . 9 S K . . . . . . . . . 1 8
1
HU..........19
S L . . . . . . . . . 2 7
LV...........20 SK..........28
LT. . . . . . . . . 2 1
MK.........29
E T. . . . . . . . . 2 2 BG.........30
RU.........23 HR.........31
UK.........24
AR.........32
KK.........25
RO.........26
EN LivingColors Mini Instructions for Use
Thank you for buying Philips LivingColors Mini.
LivingColors Mini has been especially designed to create your own
ambiance at home, through colour and light.
Please read these instructions very carefully before using LivingColors
Mini for the first time and save them for future reference. By following our
guidelines, you will enjoy the full functionality of Philips LivingColors Mini.
Important:
- Carefully remove the parts from the packaging.
- Check that all parts are available.
- Check the connections.
Getting started:
1. Place LivingColors Mini in your selected location on a flat, stable
surface.
2. Direct LivingColors Mini towards the wall, insert the connection
plug into the lamp (figure c.) and then plug it into the wall socket.
LivingColors Mini will show a short introduction to the colour
possibilities (this is normal).
3. Switch on LivingColors Mini by pushing the "I" (on) on the on/off
button (figure a.).
4. Create your own ambiance (figure b.) by:
Touching the desired colour on the colour wheel. You can move your
finger over the colour wheel to refine the colour.
5. Switch off LivingColors by pushing the "0" (off) on the on/off button.
LivingColors Mini will remember the last setting (figure a.).
Increase the LivingColors Mini possibilities:
1)Automatic colour changing mode
Press "I" for 5 seconds, LivingColors Mini will switch to automatic colour
changing mode.
To switch back to static colour mode, switch off ("0") and on ("I") again.
(figure a.)
2)Compatibility with timers
You can set your LivingColors Mini on a timer. At the selected time of
the day, your LivingColors Mini will switch on, projecting the same light
as during your last usage (depending on your last setting during the last
usage, it will be a static colour or the automatic colour changing mode).

Troubleshooting:

1.LivingColors Mini is not providing light
- Check the connections
- Check the plug
2.LivingColors Mini is still not working to the correct standard
- Contact the Philips Lighting Contact centre (see also Warranty and
Service)
Cleaning and maintenance:
Remove the plug from the wall socket.
To avoid scratching, LivingColors and the plug should only be cleaned with
a soft dry cloth.
Do not use cleaning agents, abrasives or solvents. Avoid getting liquid on
any electrical parts.
Safety instructions:
Keep the plug and LivingColors Mini away from liquids and humidity.
- LivingColors Mini is for indoor use only. Do not use in damp places, e.g
bathrooms or outdoors.
- LivingColors Mini is not a toy designed to be played with by children.
- Do not place on hot surfaces.
- For safety reasons and under the terms of the warranty, the
LivingColors Mini and plug must not be opened.
- Only use the plug supplied: using the wrong plug with the wrong
polarity or current may damage your LivingColors Mini.
- If there is a power cut in your home, your LivingColors Mini will switch
off. When the power comes back on again, your LivingColors Mini will
automatically return to the last setting.
2