Table of Contents
Advertisement
Topic:
EN
Common solutions
Common solutions
The following advices are generally valid and refer to diverse Xomax models with
the similar characteristics. Please note that some articles may refer not to your
model exactly and contain the describtion of features and functions that your model
does not support.
The describtion of
the problem
The remote control
is without function.
The unit does not
turn on.
XOMAX
The cause and the solution
Solution 1:
Please ensure that the battery film is removed. By delivery the
battery is protected by a film which should be removed before
usage.
Solution 2:
The battery could be empty. Please replace it if required.
Solution 3:
Please make sure that the infrared receiver (labelled with IR)
on the control panel is not blocked.
Note:
You can test the functionality of the remote control as follows:
please hold the IR transmitter towards a camera (e.g. a cell
phone camera) and press any button on the remote control. If
the remote control is operative you can see the infrared signal
on the display of the used camera device.
This problem is in most cases caused due to a wrong connec-
tion of the ISO cable.
Please review the pin assignments of the ISO cable and ISO
plug. Pay attention to the proper connection of the ignition-
and steady plus and correct the discrepancy if required.
Note:
Though the design of ISO plug is standardized, it's pin
assigment is not and may vary. Thus in case of mismatch
of connections due to different pin assignments a simple
plug'n'play connection may lead to grievous errors.
16
X M - C D B 6 1 8
Advertisement
Table of Contents
