Omron COMP A-I-R Pro NE-C29-RU Instruction Manual page 19

NE-C29_RU.book Page 19 Thursday, October 25, 2012 1:42 PM
Handling the Vaporiser Head
The vaporiser head is an important part that is used to vaporise medication.
Be sure to observe the following precautions when handling it.
Caution:
• Always wash the vaporiser head after each
use. Failure to do so could cause blockages
and a deterioration in your condition due to a
failure to vaporise medication effectively.
• Do not use a brush or pin etc., to clean the
parts. This could damage the baffle and cause
a deterioration in your condition due to a fail-
ure to vaporise medication effectively.
• When disinfecting the parts by boiling, be
sure to boil them in plenty of water. If there is
insufficient water, the parts could become dis-
torted due to the high temperature near the
bottom of the pan. Distorted parts could
cause a deterioration in your condition due to a failure to vaporise medi-
cation effectively.
• Do not boil vaporiser head together with other objects, other than appli-
cable nebuliser accessories. This could damage the baffle and cause a
deterioration in your condition due to a failure to vaporise medication
effectively.
• Do not use a microwave oven, dish dryer or hair dryer to dry parts. The
parts could become distorted due to the high temperature and cause a
deterioration in your condition due to a failure to vaporise medication
effectively.
5. Cleaning and daily disinfecting
Baffle
Vaporiser head
EN
19