Transporting Your Literider - Golden LiteRider GL111 Owner's Manual

IX. TRANSPORTING YOUR LITERIDER™
Figure 24. LiteRider Models GL111/GL141
All Golden LiteRider scooters can be equipped with docking devices for
loading onto a vehicle by means of a mechanical lift or hoist. Contact your Golden
Technologies, Inc. provider for more information concerning docking devices and scooter
lift devices.
To Transport Your LiteRider:
• Disassemble or fold down the seat and tiller (see section VII. "Disassembly") as close as
possible to the loading area of the vehicle to be used for transporting your scooter.
• The degree to which you disassemble your LiteRider or fold the seat and tiller depends
on the size and shape of the cargo area of the transporting vehicle.
• Moving blankets or other forms of padding may be used to protect your LiteRider
during transportation.
• Do not lift your LiteRider by its plastic body parts or dash. Breakage of these parts is
not covered by the warranty.
• Do not use the tires or wheels to lift the rear carriage. The carriage may rotate and
cause injury or damage.
If your scooter and its components are not properly and securely
stowed during transportation, the scooter or the components may move or become
airborne and cause injury or damage.
Never sit on your LiteRider when it is being transported. Secure with
an approved tie-down system.
If transporting your scooter on an outside lift, remove seat or make
sure the seat is as down s e c u r ely with an approved tie-down system
supplied by your lift manufacturer while a s your s Failure to
do so could result in the seat coming loose and becoming airborne. This
situation could cause problems for the traffic behind you and possibly result in
an injury.
30