Riding Your Literider; Mounting - Golden LiteRider GL111 Owner's Manual

VI. RIDING YOUR LiteRider™

MOUNTING

For your first driving session, make certain that your Golden LiteRider™
starts out on a level surface and that you will continue driving on a level surface.
BEFORE GETTING ON YOUR LITERIDER
1. Check to be certain that the power is turned off. See section V. "Operation" in this
manual. This will eliminate the possibility of accidentally activating the paddle controls
and causing injury to yourself and/or others.
2. Check to be certain that your LiteRider's freewheel lever is in the engaged position. See
"Freewheel Mode" on page 19 of section V. "Operation" in this manual.
3. Flip up the armrest(s).
When getting on or off your LiteRider, keep your weight toward the
middle of the deck. Putting most or all of your weight on the edge of the deck may
cause an unstable condition.
GETTING ON YOUR LITERIDER
1. Position the seat for safe and easy mounting. Ensure that the seat is facing forward.
See figure 4 on page 13.
2. Return tiller to full upright position if necessary.
3 Carefully place one foot on the approximate center of the deck and seat yourself
comfortably and securely on the seat.
4. Flip down the armrest(s).
5. Place the key into the key switch.
6. Rotate the key to the on position. See #1 on figure 12.
1 1
Figure 11. Key Switch (Off) Figure 12. Key Switch (On)
21