Steering In Tight Spots - Golden LiteRider GL111 Owner's Manual

VI. RIDING YOUR LiteRider™
Steering in a Tight Spot
If you must steer in a tight spot, such as entering a doorway or when turning around:
1. Bring your LiteRider to a full stop.
2. Set speed at the lowest setting.
3. Turn the tiller to the direction in which you wish to drive.
For more information on dealing with obstacles and tight spots, see "Control Through
Tight Spots" on the next page.
Steering in Reverse
Backing up your LiteRider requires attention to what you are doing.
Use extreme caution when operating your scooter in reverse.
Plan your route to avoid getting into a difficult situation.
Make sure your proposed route is clear of people, pets, and obstacles.
1. Use your right fingers to push the throttle control lever or use your left fingers to pull
back on the throttle control lever. See figure 5 on page 16.
2. Turn the tiller to the left to drive in reverse to the left.
3. Turn the tiller to the right to drive in reverse to the right.
Your LiteRider's speed in reverse is fifty percent of the speed set at the
speed control dial.
Prevent injury! Do not drive down an incline in reverse.
23