Care Maintenance; Routine Maintenance; Cleaning Your Literider - Golden LiteRider GL111 Owner's Manual

ROUTINE MAINTENANCE

Your scooter requires a minimal amount of care and maintenance. If you do not feel
confident in your ability to perform the maintenance listed below, you can schedule an
inspection and maintenance with your provider.
 Make sure your batteries are fully charged daily. See "Battery Charging".
 Regularly inspect your scooter's tires for signs of wear.
 Regularly inspect all exposed harnessing and connections for wear, damage, and
corrosion. Have your provider repair or replace any damaged harness or connector.
 Periodically check all fasteners for tightness, wear, and corrosion. If any of these are
present, turn off the scooter and contact your provider.
Be careful of pinch points and sharp metal parts (wear gloves).
 Keep all the electrical components (charger, console panel, and electronics) free from
moisture. If any of these items do become exposed to moisture, let them dry
thoroughly before attempting to operate your scooter again.
 All bearings are permanently lubricated and sealed. No additional lubrication is
required.

CLEANING YOUR LiteRider

Tires
Clean the tires with ordinary kitchen-type cleaners and a damp cloth. Do not use
solvents on the tires. Solvents can cause the tire material to break down or become too
soft.
Body
• Clean the body of your scooter with a damp cloth. Do not hose down your scooter! Dry
with a clean soft cloth.
• Use cool water mixed with a mild soap to remove dirt and oils.
• Buff by hand with a soft cloth.
Vinyl Seat
Clean with a mild soap or mild detergent and a damp cloth. A vinyl cleaner may also be
used.
X. CARE AND MAINTENANCE
Do not use excess water or pressure when cleaning your scooter.
31