Table of Contents
Advertisement
SSID is also called the network name, ESSID or ESS-ID.
Encryption key is also called the network key, security key, password, or pre-shared key (PSK).
Connecting via an access point (Infrastructure)
Put this machine in an unobstructed view position near the wireless LAN access point. (The recommended distance is
30 m or less.)
It may be difficult to connect if there is a metal, aluminum sash or reinforced concrete wall between this machine and
the wireless LAN access point.
IEEE802.11a (W52/W53) is prohibited to use outdoors due to the Radio Law. Use it indoors only. Use it indoor only.
When using 2.4GHz for a connection, use it within the range of 1 to 11ch. 12ch and 13ch are applicable only to
devices for Korea. Please follow the laws and regulations of the country where it is used.
When using 5GHz, use it within the range of 36 to 48ch, 52 to 64ch, 100 to 140ch, 149 to 165ch.
1. Enabling the wireless LAN function
1
Power on this machine.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and press
«OK».
3
Input the admin password using the numeric keypad, and press «OK».
Admin
password(P.114)
4
Check that [Network Setup] is selected, and press «OK».
5
Check that [General Setup] is selected, and press «OK».
6
Check that [Extended Network] is selected, and press «OK».
7
Press ▼ to select [Wireless], and press «OK».
Connecting to the PC after preparing this machine
- 40 -
Advertisement
Table of Contents
