Table of Contents
Advertisement
9
If paper is jammed in the fuser unit, with the warning label of the fuser unit facing you, slowly pull
out the jammed paper towards you.
When the fuser unit is hot, wait until it cools down before any operation.
Do not pull out in the reverse direction.
10
With the warning label of the fuser unit facing you, hold both the left and right handles.
11
Place the fuser unit in this machine, tilt its left and right handles inward, and lock the fuser unit.
Make sure that the fuser unit does not float from the top of the output tray. If floating, the fuser unit will not be
recognized so that it is not possible to start printing.
12
Close the front cover firmly with both hands.
Doing so may cause burns.
- 158 -
Troubleshooting
Advertisement
Table of Contents
