Table of Contents
Advertisement
Selecting a Source
1 Select
.
2 Turn the dial to highlight a source.
NOTE: If the device is part of a group, continue turning the dial to access the sources on other devices in the
group
(Fusion PartyBus Networking, page
If a source cannot be shared with the group, it will appear gray and you cannot select it.
3 Press the dial to select the source.
Adjusting the Backlight Brightness
1 Select
> BRIGHTNESS.
2 Adjust the brightness level.
NOTE: You can adjust the backlight brightness on this remote control only. If you want to adjust the
brightness on other remote controls or stereos on the network, you must adjust the setting from each remote
control or stereo directly.
Adjusting the Volume
Using this remote control, you can control the volume of any zone on any stereo connected to the Fusion
PartyBus network.
1 Turn the dial to adjust the volume for the home zone on the stereo.
2 If necessary, press the dial to switch between zones.
NOTE: If a stereo is part of a group, you can adjust the volume of all stereos in the group or individual zones
on each stereo
(Fusion PartyBus Networking, page
Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all stereos connected to the Fusion PartyBus network
(Fusion PartyBus Networking, page
1 From any source, press
The mute symbol appears and audio from this stereo is silenced.
NOTE: If the stereo is part of a group, the audio from all grouped stereos is silenced.
2 Press and hold the dial to select MUTE SYSTEM.
Audio from all connected stereos is silenced.
3 Press and hold the dial to select UNMUTE SYSTEM.
Audio is restored to all connected stereos.
Adjusting the Subwoofer Level
You can adjust the subwoofer level for each zone.
1 Press the dial, and select a zone with a connected subwoofer.
2 Press and hold the dial.
The SUB LEVEL adjustment for the zone appears.
3 Adjust the subwoofer level and press the dial to set it.
Getting Started
6).
6).
.
6).
5
Advertisement
Table of Contents
