Valcom V-1097 Quick Start Manual

INTRODUCTION

The V-1097, Slide Volume Control, is a Valcom
Volume Control Unit which can be mounted into
a single-gang electrical box. This unit is
compatible with all Valcom one-way and two-way
speakers.
NOTE: The V-1097 is not designed to
connect directly to the output of high
powered amplifiers.

SPECIFICATIONS

Applications


To control volume of one-way amplified
speaker assemblies in inaccessible areas

To control large groups of one-way amplified
speaker assemblies

To control volume of Valcom talkback
speakers

Dimensions/Weight


4.50"H x 2.75"W x 1.25"D
(11.43cm H x 6.99cm W x 3.18mm D)

Weight: .25 lbs. (0.11 kg)

Connections

Connections when using a One-Way
Control Unit
(Refer to Figure 1)

Connect wall mount volume control input tip
and ring to desired zone output leads from
page control.

Connect wall mount volume control output
tip and ring to speakers.
Connections when using a Talkback Control Unit
(Refer to Figure 2)

Connect wall mount volume control tip input
terminal to tip output lead of talkback page
control unit.

Connect wall mount volume control tip
output terminal to tip lead of talkback
speaker.

Connect ring output of talkback page control
directly to ring of talkback speaker, (do not
connect to V-1097).
V-1097
SLIDE VOLUME CONTROL

Mounting

Surface Mounting - Mount standard single-gang
electrical box. Install faceplate onto electrical
box.
Flush Mounting - Install faceplate onto standard
single-gang electrical box.
INPUT
Tip - Red
Ring - Green
One-Way
Page
Control
Unit
Figure 1. One-Way Connection
INPUT
Tip - Red
Ring
Talkback
Page
Control
Unit
Figure 2. Talkback Connection
1
Issue 1
V-1097
OUTPUT
Tip - Brown
Ring - White
ONE-WAY
AMPLIFIED
SPEAKER
V-1097
OUTPUT
Tip - Brown
Ring
TALKBACK
SPEAKER
947529