Chapter 3. Web-Based Management; Introduction; Connecting To Internet Camera - Planet Networking & Communication ICA-3260 User Manual

This chapter provides setup details of the Internet Camera's Web-based Interface.

3.1. Introduction

The Internet Camera can be configured with your Web Browser. Before the configuration,
please make sure your PC is under the same IP segment with Internet Camera.

3.2. Connecting to Internet Camera

A. Use the following procedure to establish a connection from your PC to the Internet Camera.
B. Once connected, you can add the camera to your Browser's Favorites or Bookmarks.
Start the web browser on the computer and type the IP address of the camera.
The Default IP: "http://192.168.0.20"
The login window of Internet Camera will appear,
Default login username and password are both admin.
If the user name and password have been changed with PLANET IP
Wizard II, please enter the new user name and password here.
After logging on, you should see the following messages at the top of Internet
Explorer:
Click on the message, and click Run Add-on

Chapter 3. Web-based Management

25
60fps Full HD IR Bullet IP Camera
ICA-3260