Add Camera To Hik-Connect - HIKVISION ECI-B12F Quick Start Manual

ECI-B12Fx Network Bullet Camera Quick Start Guide
Platform Access Configuration (Web)
3. Set the Platform Access Mode to Hik-Connect.
4. Check the Enable checkbox.
5. Click and read the "Terms of Service" and "Privacy Policy" in the pop-up
window.
6. Create or change the verification code for the camera.
NOTE:
A verification code is required when adding the camera to Hik-Connect.
7. Save the settings.

3.5.6 Add Camera to Hik-Connect

Before You Start
Enable Hik-Connect on the camera before adding it to your Hik-Connect
account. Refer to Chapter 5.1.
1. Use a network cable to connect the camera to a router if the camera
does not support Wi-Fi.
QSG VE ECI-B12Fx 060118NA
Connect a Router
20