Modify The Ip Address - HIKVISION ECI-B12F Quick Start Manual

ECI-B12Fx Network Bullet Camera Quick Start Guide
Select inactive device.
NOTE:
The SADP software supports activating the camera in batch. Refer to the
SADP software user manual for details.
3. Create and input the new password in the password field.
4. Confirm the password.
STRONG PASSWORD RECOMMENDED – We highly
recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product.
We also recommend that you reset your password regularly.
Especially in a high security system, resetting the password
monthly or weekly can better protect your product.
NOTE:
5. You can enable the Hik-Connect service for the device during activation.
Refer to Chapter 5.1 for detailed information.
6. Click Activate to start activation.
7. You can check whether the activation is complete on the pop-up window.
If activation fails, make sure that the password meets the requirement
and try again.

3.3 Modify the IP Address

To view and configure the camera via LAN (Local Area Network), you need
to connect the network camera in the same subnet with your PC.
QSG VE ECI-B12Fx 060118NA
Input and confirm
password.
SADP Interface
15