Table of Contents
Advertisement
ECI-B12Fx Network Bullet Camera Quick Start Guide
Use the SADP software or client software to search and change the IP
address of the device. We take modifying the IP address via SADP software
as an example to introduce IP address modification.
For IP address modification via client software, refer to the client software
user manual.
1. Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet as your computer by
either modifying the IP address manually or checking the Enable DHCP
checkbox.
NOTE:
You can enable the Hik-Connect service for the device during activation.
Refer to Chapter 5.1 for detailed information.
1. Input the admin password and click Modify to activate your IP address
modification.
2. Batch IP address modification is supported by the SADP. Refer to the
SADP user manual for details.
3.4 Access via Web Browser
System Requirement:
QSG VE ECI-B12Fx 060118NA
Modify the IP Address
16
Advertisement
Table of Contents
