Using A Usb Mouse; Clicking A Key; Changing - Brother VM5200 Operation Manual

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE
Note
• The connectors on the USB cable can only
be inserted into a port in one direction. If it
is difficult to insert the connector, do not
insert it with force. Check the orientation of
the connector.
• For details on the position of the USB port
on the computer (or USB hub), refer to the
instruction manual for the corresponding
equipment.

Using a USB Mouse

The USB mouse, connected to the sewing
machine, can be used to perform a variety of
operations in the screens.
Note
• If a mouse other than the optional USB
mouse is used, it may not perform as
described in this Operation Manual.
a USB port for mouse/media (USB 2.0)
b USB mouse
Note
• Do not perform operations with the mouse
at the same time that you are touching the
screen with your finger or the included
touch pen.
• A USB mouse can be connected or
disconnected at any time.
• Only the left mouse button and its wheel
can be used to perform operations. No
other buttons can be used.
• The mouse pointer does not appear in the
opening screen.
B-66

■ Clicking a Key

When the mouse is connected, the pointer appears
on the screen. Move the mouse to position the
pointer over the desired key, and then click the left
mouse button.
Memo
• Double-clicking has no effect.
a Pointer
■ Changing Pages
Rotate the mouse wheel to switch through the tabs
of the pattern selection screens.
Memo
• If page numbers and a vertical scroll bar for
additional pages are displayed, rotate the
mouse wheel or click the left mouse button
with the pointer on
display the previous or next page.
a
/
/ or to