Attaching The Embroidery Foot "W - Brother VM5200 Operation Manual

Attaching the Embroidery Foot
"W"
CAUTION
• When attaching a presser foot, always press
on the screen to lock all keys and
buttons. You may accidentally press the
"Start/Stop" button and possibly cause injury.
• Be sure to use embroidery foot when doing
embroidery. Using another presser foot may
cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.
a
Press the "Needle Position" button to raise
the needle.
b
Press to lock all keys and buttons.
 The entire screen becomes white, and all keys and
operation buttons are locked.
CAUTION
• When attaching a presser foot, always press
on the screen to lock all keys and
buttons. You may accidentally press the
"Start/Stop" button and possibly cause injury.
c
Raise the presser foot lever.
d
Push the black button on the presser foot
holder and remove the presser foot.
a Black button
b Presser foot holder
 Remove the presser foot from the presser foot
holder.
e
Use the included screwdriver to loosen the
screw of the presser foot holder, then
remove the presser foot holder.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
 Remove the presser foot holder.
f
Position the embroidery foot "W" on the
presser foot bar by aligning the notch of the
presser foot to the large screw.
Side view
BEFORE EMBROIDERING
Basic operations B-59
B
1