Advertisement
10
Make sure the studs protruding from
the bottom of the Mounting bracket
are installed with threads all the way
through the bracket.
13
Lift Canopy allowing the 2 studs
to protrude through the canopy.
16
Install rubber pad between fan
body and canopy.
© 2013 Monte Carlo Fan Company
11
House
Black
White
Ground
Connect black and blue wire from fan to Black or (Hot)
wire from house. Connect White wire from Fan to White
(Neutral) wire from house. Connect Ground leads from
mounting bracket and downrod to Ground lead from
house. Refer to Safety Tips section of manual.
14
Canopy disk
Next lift the canopy disk and install
knurled nuts as shown. Tighten the
knurled nuts securely. The canopy should
adjust for any irregularity in the ceiling or
Outlet box.
17
Remove side covers from canopy ex-
posing 4 holes. 2 closed holes and 2
open "L" shape holes.
12
Fan
Blue
Black
White
Green
Make wire connections to power source using wire nuts
provided. Make sure that no filiments are outside of
the wirenut. After making the wire connections, the
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on the
other side of the outlet box.
15
Remove every other screw as circled
and save for later use.
18
Pass leadwires and safety cable
through the canopy.
4
Flush Mount Installation
6/15/2013
Advertisement
