Table of Contents
Advertisement
OVEN CONTROL FUNCTIONS
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various pad functions of the oven as described below.
CLOCK PAD— Used to
BROIL PAD— Used to
set the time of day.
select the variable broil
function.
TIMER ON/OFF
PAD— Used to set
or cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF
pad is used to set
the Continuous Bake
feature.
SELF-CLEAN PAD—
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light will glow each time the
Used to select the Self-
oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the
Cleaning cycle. A 2 or
oven is first set to operate, or if the desired temperature is reset higher than the actual oven
3 hour Self-Clean time
temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or
may be selected.
when using the Self-Clean cycle or the oven door lockout is activated.
SETTING OVEN CONTROLS
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to °C (Celsius) or from
°C to °F (control should not be in a Bake or Clean
mode):
1. Press
. "— —" appears in the display.
2. Press and hold the
3. Press and hold
until °F or °C appears in the display.
4. Press the
or
to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
NOTE
*Note: The OVEN indicator light on the electronic display
will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is
cycling to maintain the selected baking temperature. When
the preheat indicator light turns OFF, your oven is ready.
10
10
UP and DOWN ARROW PADS— Used along with
the function pads to select oven temperature, time of
day, clean time and minute timer.
until "HI" appears in the display.
To Set the Clock
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
1. Press
once (do not hold pad down).
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
NOTE
The time of day must first be set in order to operate
the oven.
FEATURE
INDICATOR
LIGHTS— These light
to show which feature
is in use.
BAKE PAD—Used
to select the bake
function.
CLEAR/OFF PAD—
Used to clear any
function previously
entered except the
time of day and minute
timer. Press CLEAR/
OFF to stop cooking.
Also the CLEAR/OFF
pad is used to activate
oven door lockout
setting.
or
until
Advertisement
Table of Contents
