Table of Contents
Advertisement
4
Press the [I] key to enter Status mode.
5
Press the [J] and [K] keys to select the status you want to transmit.
You can enter a status ID using the keypad or the [J]/[K] key (refer to step 3, above).
●
6
Press the key programmed as [Call 1] to [Call 6] to initiate the call.
Receiving
o
The
indicator will flash and a calling ID and status message will appear when a
Status call is received. Press any key to return to normal operation.
Reviewing Messages in the Stack Memory
o
1
Press the key programmed as [Stack] to enter Stack mode.
The category list is displayed.
●
The categories are identified as follows:
●
: Caller ID,
2
Press the [J] and [K] keys to select the desired category, then press the [ ] or
[ ] key.
The Caller ID list, Status Message list or Short Message list is displayed according to
●
the category selected. Pressing the [H]/[I] keys allows you to cycle the display
information as follows.
While Caller ID list is displayed:
–
[H]: Caller ID > CH > Time Stamp
[I]: Caller ID > Time Stamp > CH
While Status Message list or Short Message list is displayed:
–
[H]: Message > Caller ID > CH > Time Stamp
[I]: Message > Time Stamp > CH > Caller ID
To delete the selected message, press the [
●
press and hold the [
3
Press [
] to return to normal operation.
58
: Status Message,
] or [#] key for one second.
: Short Message
] or [#] key. To delete all messages,
Advertisement
Table of Contents
