Billion BiPAC 5200W RC User Manual page 12

Port
PWR
1
2 RESET
LAN
3
ADSL
4
(LINE)
WPS
5
Switch
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Note: 5200SW RC has only one LAN port.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Push the WPS button to trigger the Wi-Fi Protected Setup
function.
Meaning
10