Using The Blender - Philips HR2071/20 Manual

Motor circuit protector
The appliance is equipped with a motor circuit protector that switches off the motor if the motor
jams (which might occur during heavy processing jobs or if the appliance is not used according to
the instructions in the user manual). If this happens, DO NOT press the reset button in the bottom
of the appliance immediately after the circuit protector has switched off the appliance. First switch
off and unplug the appliance and let it cool down to room temperature. Then check if the quantity
of ingredients you are processing does not exceed the quantity mentioned in the user manual or if
something is blocking the blade unit. After this, press the reset button in the bottom of the appliance
and continue processing. Do not touch the blade unit when you press the reset button.
Before first use
- Thoroughly clean the parts that come into contact with food before you use the appliance for
the first time (see chapter 'Cleaning').
using the appliance
Blender
The blender is intended for:
,
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
Preparing the blender for use
1 Screw the blender blade unit clockwise onto the blender jar (Fig. 2).
2 Mount the blender jar with the blade unit attached to it onto the motor unit and turn it
clockwise until it locks into position (Fig. 3).
3 Put the ingredients in the blender jar.
Let hot ingredients cool down before you put them in the blender jar (max. temperature
80°C/175°F).
4 HR2071 only: fasten the lid on the jar by pressing it down (1) and turning it clockwise
(2). (Fig. 4)
Note: Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour
out liquids.
5 HR2068/HR2067/HR2061 only: close the lid.
6 Insert the measuring cup into the lid (Fig. 5).
7 To disassemble the blender, follow the instructions above in reverse order and direction.

using the blender

Never reach into the jar with your fingers or an object (e.g. a spatula), while the blender is
running.
Do not exceed the maximum level indicated on the blender jar.
1 Put the mains plug in the wall socket.
2 Switch on the appliance. (Fig. 6)
Note: See the blender table at the end of this user manual for the recommended quantities, speed
settings and processing times.
- To process ingredients at a particular speed, turn the control knob to the required speed setting.
EnglisH
9