Built-In Safety Lock; Overload Protection; Blender Jar - Philips HR3868/01 User Manual

Built-in safety lock

This feature ensures that you can only
switch on the appliance if you have put
the blender jar correctly on the motor
unit. If the blender jar is put correctly,
the built-in safety lock is unlocked.
When the blender jar is not placing well
on the motor unit during blending, the
message "Err" displays.
To reset your blender in this case, follow
the steps below:
1
Switch off the blender. Make sure
the rotary knob is at "0".
2
Switch on the blender.
Auto stop
Your blender will be automatically
turned off after 4 minutes of continuous
operation. This can avoid potential
problems due to prolonged usage.

Overload protection

The overheat warning LED
(thermometer icon) flashes when the
blender is overloaded. If the blender
continues working with heavy load,
the message "Hot" displays when it
is fully overloaded. The blender will
automatically stop working.
Note: if the temperature of the
appliance is too high or the appliance
is overused, the message "Hot" displays
directly and the blender will also stop
working.
To reset your blender in case of
overload and auto stop protection,
follow the steps below:
1
Switch off the blender and then
unplug it.
2
Remove some of the ingredients to
reduce the load.
3
Allow the appliance to cool down
for 30 minutes.
4
Connect the power plug to the wall
outlet and switch on the blender.

Blender jar

The jar is designed for processing
various recipes like smoothie, juice,
sauce, grain milk, soup, puree, frozen
dessert, ice crushing, nut butter,
chopping or grinding dry ingredients.
If the jar is used for grinding dry
ingredients, the jar wall will be
scratched and become cloudy. There
is no negative impact on the blending
performance and no food safety
concern. It is still safe to use.
EN 11