TYAN S7105 Manual page 113

3.5.5.1.1 Socket 0 PcieBr1D00F0 – Port 1A
PCI-E Port
In auto mode the BIOS will remove the EXP port if there is no device or errors on
that device and the device is not HP capable. Disable is used to disable the port
and hide its CFG space.
Auto / Disabled / Enabled
Hot Plug Capable
This option specifies if the link is considered Hot Plug capable.
Disabled / Enabled
Surprise Hot Plug Capable
This option specifies if the link is considered Hot Plug capable.
Disabled / Enabled
PCI-E Port Link
This option disables the link so that the no training occurs but the CFG space is still
active.
Enabled / Disabled
113
http://www.tyan.com