Advertisement
iDS-2CD71xxG0-IZS Network Dome Camera Quick Start Guide
Do not place the camera in extremely hot, cold, dusty, or damp locations, and do not expose it to high
electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable,
and contact the service center.
Time Synchronization
Set up camera time manually for the first time access if the local time is not synchronized with that of the
network. Visit the camera via Web browse/client software and go to time settings interface.
Installation
Make sure the device is firmly secured to any wall or ceiling mountings.
Be sure that there is enough space to install the camera and accessories.
Make sure that the device in the package is in good condition and all the assembly parts are included.
Make sure that the wall is strong enough to withstand at least four times the weight of the camera and
the mount.
The standard power supply is 12 VDC, please make sure your power supply matches your camera.
Make sure that the power has been disconnected before you wire, install, or disassemble the device.
Make sure that no reflective surface is too close to the camera lens. The IR light from the camera may
reflect back into the lens causing reflection.
QSG iDS-2CD71xxG0-IZS Dome 022521NA
For a device with this sticker, this device is intended for installation in a restricted
access location. Access can be gained only by service persons or by users who
have been instructed about the reasons for the restrictions applied to the location
and about any precautions that shall be taken.
6
Advertisement
