Activate And Access Network Camera; Reset And Restore Camera - HIKVISION iDS-2CD71G0-IZS Series Quick Start Manual

iDS-2CD71xxG0-IZS Network Dome Camera Quick Start Guide

Activate and Access Network Camera

Activate and Access Camera
Scan the QR code to get .
Note that mobile data charges may apply if Wi-Fi is unavailable.

Reset and Restore Camera

Press Reset button for about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port no., etc.
For the position of the reset button, refer to the figure in the interface introduction page.
QSG iDS-2CD71xxG0-IZS Dome 022521NA 26