Wi-Fi Clone - TP-Link TL-WPA8630P User Manual

Chapter 3
Follow the steps below to enable the Wi-Fi Move feature:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Wireless > Wi-Fi
3. Toggle On to enable the feature.
Note:
When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password, Wireless
Security, Wireless Mode, Wireless Radio Status, Wi-Fi Schedules, LED Schedules, Wi-Fi Clone Settings,
MAC Filter Settings, Parental Controls and Guest Network.
3 4

Wi-Fi Clone

I want to:
How can I
do that?
Move.
Copy wireless settings from my router to my extender, so I can
use the same SSID and password to access the internet in my
house.
1 Connect to the powerline extender wirelessly. Visit
tplinkplc.net, and log in with the username and password you
set for the extender.
2 Go to Wireless >
3 Select a Wi-Fi band or both to be cloned.
selected by default.
4 Before cloning, make sure your router supports the same
band as your extender. If you do not know how to check this,
go to your router's User Guide for more information.
5 Plug your extender near your router.
6 Press the WPS button on your router.
Configuring via Web Management Interface
Wi-Fi Clone.
http://
2.4GHz & 5GHz is
16