Chapter 3
Follow the steps below to enable the Wi-Fi Move feature:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to
3. Toggle
Note:
When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password, Wireless
Security, Wireless Mode, Wireless Radio Status, Wi-Fi Schedules, LED Schedules, Wi-Fi Clone Settings,
MAC Filter Settings, Parental Controls, and Guest Network.
3 4
I want to:
How can I
do that?
Downloaded from
ManualsNet.com
Wireless
>
Wi-Fi
Move.
On
to enable the feature.
Wi-Fi Clone
Copy wireless settings from my router to my extender, so I can
use the same SSID and password to access the internet in my
house.
1 Before cloning, make sure your router supports the same
band as your extender. If you do not know how to check this,
go to your router's User Guide for more information.
2 Plug your extender near your router.
3 Press the WPS button on your router.
4 Within two minutes, press the Wi-Fi button on the front panel
of the extender for 1 second. The Wi-Fi LED starts blinking.
search engine
Configuring via Web Management Interface
WPS
WAN
WPS
LAN
Wireless Router
15