Skyrc D100 V2 Instruction Manual page 6

Special Features
Voice Guide
Purposes to make the charger more user friendly and customizable. A speaker supported
English and Chinese separately have been included in the left side of the charger that
can reduce the times for mis-operation.
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for each channel. You
can keep the data pertaining to program setting of the battery of continuous charging or
discharging. Users can call out these data at any time without any special program
setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
PC Control Software "Charge Master"
The free "Charge Master" software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during
the charging, view charge data in real-time graphs. And you can initiate, control charging
from "Charge Master".
With "Charger Master" and one computer, you could operate and update two channels
simultaneously.
Smart Phone Control via Bluetooth Module (both iOS and Android)
Finally, your charger gets its own apps. The charger can be operated with a smart phone
via bluetooth connection. The smart phone APP features a "Scan to go" function that lets
the user to charge conveniently via scanning the QR code on the battery. But users
should set a program for the frequently-used batteries in the app and print to attach it on
the battery.
Internal Independent Lithium Battery Balancer
SKYRC D100 V2 employs an individual-cell-voltage balancer. It isn't necessary to
connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, SKYRC D100 V2 can monitor and balance each cell of
the battery individually. Error message will be indicated and the process will be ended
automatically if the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
SKYRC D100 V2 is adaptable to various types of lithium batteries, such as LiPo, LiIon
and the new LiFe series of batteries.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an
end of charge voltage 4.35 V.
· 04 D100 V2