Connecting The Appliance To The Home Connect App; Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Resetting The Appliance Network Settings - Bosch WAU28RH9GB User Manual And Installation Instructions

en Home Connect
Connect the mobile device to the
HomeConnect Wi-Fi network and
enter the Wi-Fi password (key)
HomeConnect.
a Your mobile device connects to
the appliance. The connection pro-
cess may take up to 60 seconds.
Open the Home Connect app on
5.
your mobile device and carry out
the steps in the app.
In the Home Connect app, enter
6.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows con and
lights up permanently, the appli-
ance is connected to the Wi-Fi
home network.
If the appliance is not connected
8.
to the Wi-Fi home network, the dis-
play shows Home Connect Error.
Check whether the appliance is
‒
within the range of the Wi-Fi
home network.
Reconnect the appliance to the
‒
Wi-Fi home network with WPS
function.
Connect the appliance to the
9.
Home Connect app → Page 34.
15.3 Connecting the appli-
ance to the Home Con-
nect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The Home Connect app is open
and you have logged on.
Set the programme to position 3.
1.
a The display shows APP.
34
Press .
2.
a The appliance connects to the
Home Connect app.
Once your appliance is displayed
3.
in the Home Connect app, carry
out the last steps in the
Home Connect app.
a If the display shows con, the appli-
ance is connected to the
Home Connect app.
15.4 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold
1.
seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press repeatedly until the dis-
3.
play shows on.
a Wi-Fi is activated.
15.5 Deactivating Wi-Fi on the
appliance
Press and hold
1.
three seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press repeatedly until the dis-
3.
play shows oFF.
a Wi-Fi is deactivated.
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
15.6 Resetting the appliance
network settings
Press and hold
1.
3 seconds.
for approx. 3
for at least
for at least