Table of Contents
Advertisement
en Troubleshooting
Fault
The spin result is not
satisfactory. The laun-
dry is too wet/too
damp.
Detergent residue on
the damp washing.
Detergent residue on
the dry laundry.
Home Connect is not
working properly.
No connection to the
home network.
Water is leaking out at
the water inlet hose.
Water is leaking out at
the water outlet hose.
48
Cause and troubleshooting
Note: Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
Start the Spin programme.
▶
Unbalance load detection system is using a reduced
spin speed to eliminate an unbalance.
Redistribute the laundry in the drum.
▶
Note: Where possible, mix large and small items in
the drum. Different sized items of laundry distribute
themselves better during the spin cycle.
Start the Spin programme.
▶
Detergents may contain water-insoluble substances
that deposit on the laundry.
Start the Rinse programme.
▶
Detergents may contain water-insoluble substances
that deposit on the laundry.
Brush out the laundry after washing and drying.
▶
Different causes are possible.
Go to www.home-connect.com.
▶
Wi-Fi is switched off.
→ "Activating Wi-Fi on the appliance", Page 34
▶
Wi-Fi is activated but a connection to your home net-
work cannot be established.
Ensure that the home network is available.
1.
Reconnect the appliance to the home network.
2.
→ "Connecting the appliance to a WLAN home net-
work (Wi-Fi) with WPS function", Page 33
→ "Connecting the appliance to a WLAN home net-
work (Wi-Fi) without WPS function", Page 33
Water inlet hose is not correctly/securely connected.
Connect the water supply hose correctly.
1.
→ "Connecting the water inlet hose", Page 14
Tighten the screw connection.
2.
The water outlet hose is damaged.
Replace the damaged water outlet hose.
▶
Water outlet hose is not connected correctly.
Connect the water outlet hose correctly.
▶
→ "Water outlet connection types", Page 15
Advertisement
Table of Contents
