Summary of Contents for Baxton Studio Grover NAB-003-Cherry/White
Page 1
Attach the runners G to pieces 3 and 4 as shown. Use screws (D). ×4 ×3 On piece 8 attach metal plate (K) using screw (D), put the bar hinges (E) as shown. On piece 11, attach the door handles (L) using screws (D).
Page 2
Attach the push system base (J) to pieces 1 as shown. Attach pieces 2, 3 and 4 to piece 1 using wooden dowel (F) , Use screws (D). Then put push system (I) on the base. cam dowels (A) and cam locks (B), make sure that the built-in ridge is facing inwards.
Page 3
Tighten the leg (15) clockwise direction. Attach pieces 10, 12 & 13 using screws (C). Make sure that the built-in ridge is facing inwards and at the bottom. ×3 Slot piece 14 into the ridges. First insert the cam locks (B) into the Turn the drawer upside down.
Page 4
Turn the unit upside down, insert the drawers. Put shelf support (H) into the hole on piece 2 & 4, put the piece 5 on the shelf support. Attach strip (O) using screw (N). Secure the unit to a wall in your chosen location using wall plugs (P) and screw (C).