Summary of Contents for Baxton Studio Valeska NL2020311
Page 1
ASSEMBLY INSTRUCTION HARDWARE LIST A x 22 C x 4 D x 16 E x 15 F x 30 G x 2 B x 22 cam lock pin screw drawer cam lock wooden dowel screw screw left slider D3X12mm D4x35mm D3x14mm I x 4 H x 2...
Page 2
Screw cam lock pin(A) to top/left/right boards(1,3,4). Fix drawer left/right slides(G,H) on left/right panels(3,4) with screw(D).
Page 3
Fix drawer left/right slides(G,H) on divider panel(5) with screw(D). Fix maget on board (18) with screw (F).Lock shelf board(6) to divider panel(5) with screw(E).
Page 4
Use cam lock(B) to lock left/right boards (3,4) to shelf boards(6). Insert wooden dowel in left/right boards(3,4), and lock bottom panel(2) to left/right board(3,4) with screw(E).
Page 5
Lock metal tube(10) to metal legs(11) with screw(L) at 50% first. Lock metal tube(10) to bottom panel(2) with screw(M) at 50% first.
Page 6
100% Fix metal legs(11) to left and right boards(3,4) with screw(M) at 100% tightened. 100% 100% Insert back panels(8) and plastic connector(9).
Page 7
Use cam lock(B) to lock top panel(1) to left/right/divider boards(3,5,4). ×4 Fix nylon strap(R) on top panel(1) with screw(P) and washer(O).
Page 8
×2 Fix hinge(I) on door panel(7) with screw(F), fix handle on door panel(7) with screw(J). Repeat for the other handle. Lock door panel(7) to left side panel(3) with screw(F).
Page 9
Lock door panel(7) to right side panel(4) with screw(F). ×2 ×2 Lock drawer left/right slider(G、H) on drawer left/right panels(14、15) with screw(D). Lock cam lock pin(A) on left drawer front panel(12), and lock handle(K) on left drawer front panel(12) with screw(J), repeat same for right drawer front panel(13).
Page 10
×2 ×2 Lock drawer left/right panel(14,15) on Insert drawer bottom board(17), repeat. Use cam lock(B) to lock left/right drawer front drawer back panel(16) with screw(E), repeat. panel(12,13) on drawer left/right panel(14,15). Put in drawers. Fix anti-tilting set as shown. Finish assembly.