Summary of Contents for Baxton Studio Grover NAB-008-Cherry/White
Page 1
Attach the runners N to pieces 3 and 5 as shown. Use screws (F). Attach pieces 3, 4 & 5 using wooden dowel (M) ,screws (D). 12PCS 1 PCS 8 PCS D CR 4 PCS 1 PCS 12PCS 4 PCS 22PCS 3 PCS 20PCS...
Page 2
On piece 8 & 9 attach metal plate (L) using screw (F), put the bar hinges (I) as shown. Attach the push system base (K) to pieces 1 as shown. Use screws (F). Then put push system (J) on the base. Attach piece 2 &...
Page 3
Turn the unit upside down, attach piece 10 to piece 7 using screw (H) as shown. Tighten the leg (18) clockwise direction. Attach pieces 13, 15 & 16 using screws (E). Make sure that the built-in ridge is On piece 14, attach the door handles (O) using screws (G). Slot piece 17 into the facing inwards and at the bottom.
Page 4
Turn the drawer upside down. Line up the holes on the outside pieces with the Turn the unit upside down, insert the drawers. holes on the runners (NDR &NDL), secure to the drawer using screws (F). The unit should now be assembled and ready to use.