Summary of Contents for Baxton Studio Connell LOR-003-Natural/Black
Page 1
On piece 1, secure the catch (L) using screws (C). Use the pre-drilled holes for guidance. Attach piece 7 to piece 9 using screw (D), insert hardware parts (S) into piece 9. 30 PCS 1 PCS 30 PCS 1 PCS 2 PCS 2 PCS 6 PCS...
Page 2
On pieces 12 attach the door handles (Q) using screws (O & P). Attach the runners T to pieces 2 and 3 as shown. Use screws (E). On pieces 16 attach the door handles (M) using screws (N), attach bar hinges (K). Attach piece 3 to piece 8 using wooden dowels (R), screw (D).
Page 3
Then attach piece 2 & 4 using wooden dowels (R),cam dowels Slot in piece 10 to the built-in ridges, then add piece 1 to the unit using (A) and cam locks (B). wooden dowels (R), cam dowels (A) and cam locks (B). Connect door 16 using bar hinges (G).
Page 4
Turn the drawer upside down. Line up the holes on the outside pieces Insert the drawers, insert hardware parts (S) into bottom of piece 2 & 4. with the holes on the runners (TDR & TDL), secure to the drawer using screws (E).