Page 1
Attach piece 7 to piece 11 using wooden dowels (F), screw (C), insert hardware parts (O) into piece 11. On piece 1, secure the catch (H) using screws (D). Use the pre-drilled holes for guidance. 12 PCS 1 PCS 12 PCS 1 PCS 10 PCS 1 PCS...
Page 2
On piece 9, attach the plates (I) using screws (E). On pieces 8 attach the door handles (J) using screws (L). On pieces 9 attach the door handles (K) using screws (M & N). Attach piece 3 & 4 to piece 6 using screws (C). Then attach piece 7 using wooden dowels (F), screw (C).
Page 3
Slot in piece 10 to the built-in ridges, then add piece 1 to the unit using Attach section to piece 2 & 5 using wooden dowels (F), wooden dowels (F), cam dowels (A) and cam locks (B). Connect door 8 & 9 cam dowels (A) and cam locks (B), tighten the cross using bar hinges (G).