Use Openvpn To Access Your Home Network - TP-Link Archer AX10 User Manual

Chapter 11

11. 1. Use OpenVPN to Access Your Home Network

In the OpenVPN connection, the home network can act as a server, and the remote
device can access the server through the router which acts as an OpenVPN Server
gateway. To use the VPN feature, you should enable OpenVPN Server on your router,
and install and run VPN client software on the remote device. Please follow the steps
below to set up an OpenVPN connection.
Step1. Set up OpenVPN Server on Your Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Note:
• Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router's WAN port and synchronize your System Time with internet.
• The first time you configure the OpenVPN Server, you may need to
Server.
3. Select the
4. Enter a VPN
should be between 1024 and 65535.
5. In the
to the device by the OpenVPN server.
Downloaded from ManualsNet.com
Home Network Router
Advanced > VPN Server
Service Type (communication protocol) for OpenVPN Server: UDP, TCP.
Service Port to which a VPN device connects, and the port number
VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased
search engine
INTERNET
> OpenVPN, and tick the
Generate
VPN Server
Remote Devices
Enable box of OpenVPN.
a certificate before you enable the VPN
51