Position Your Router; Connect Your Router - TP-Link Archer AX10 User Manual

Chapter 2
2. 1.
• The product should not be located in a place where it will be exposed to moisture or
excessive heat.
• Place the router in a location where it can be connected to multiple devices as well as
to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
• The router can be placed on a shelf or desktop.
• Keep the router away from devices with strong electromagnetic interference, such as
Bluetooth devices, cordless phones and microwaves.
2. 2.
Before you start, turn off your modem, if any, and remove the backup battery if it has
one. And place the router horizontally and orient the antennas vertically.
Follow the steps below to connect your router.
If your internet connection is through an Ethernet cable directly from the wall instead
of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router's
WAN port, and then follow steps 3 and 4 to complete the hardware connection.
Internet
1. Connect the modem to the router's WAN port with an Ethernet cable.
2. Turn on the modem, and then wait about 2 minutes for it to restart.
3. Connect the power adapter to the router and turn on the router.
4. Verify that the hardware connection is correct by checking the following LEDs.
Downloaded from ManualsNet.com

Position Your Router

Connect Your Router

2
Power
On
search engine
1
Internet
2.4G 5G
On On On
Connect the Hardware
3
8