FUTABA T32MZ Setting Manual page 3

1
1. Select "Gyro setting" on the last page of
Airplane Model Menu
2
2. Select "Start"
3
3. Home screen is displayed
◆ When copying data from Gyro A to Gyro B
Connect the gyro A to the T32MZ and press [Start]. (Enter the data of A into T32MZ)
If you press Start here, the B data will be download to the
T32MZ and the A data will be lost.
Connect Gyro B to T32MZ and press [GY Settings Transfer]. (Put data on A into gyro B)
SETTING
When "GY Settings Transfer" is
selected, the gyro setting data saved
in T32MZ is written to the gyro.
Select "Start"
This will download the gyro data to
the T32MZ.
3
* At this time, if Gyro is not connected to
T32MZ by wire, this screen appears.
Tap "Yes" to display the GYA553 data saved in T32MZ.
To Basic menu