Error Codes - Elation FUZE SFX User Manual

E R R O R C O D E S

ERROR CODES

PAN Er
TILT Er
RotGobo
RotGobo2
Iris
RotGoboIndex
RotGobo2Index
Animation
Anima.Index
Zoom
Focus
Frost
Prism
PrismIndex
HeadTemp
CoolFan1
CoolFan2
CoolFan3
CoolFan4
BaseTemp
BaseFan
Error Codes subject to change without notice
Movement is not located in the default position after the reset.
These messages will appear after a fixture reset if the magnetic-indexing
circuit malfunctions (sensor failed, or magnet is missing) or there is
a motor failure (defective motor or a defective motor IC drive on the
main PCB). This error may also be displayed if the head/yoke was blocked
during a reset function.
Movement is not located in the default position after the reset. These
messages will appear after a fixture reset if the magnetic-indexing
circuit malfunctions (sensor failed, or magnet is missing) or there is a
motor failure (defective motor or a defective motor IC drive on the main
PCB).
These messages will appear if there is a temperature and/or fan
malfunction.
DESCRIPTION
38