Getting Started - Roborock Auto-Empty Dock User Manual

Getting Started

Assembly
1. Take the screwdriver from its storage bin at the bottom of the base.
2. Place dock upside down on a soft, flat surface (carpet/towel/
cloth) and attach the base by using the six screws provided.
Note: Hold the dustbin cover securely when upside down to prevent damage
from falling.
3. Connect the power cable to the dock, and keep excess cable
inside the storage slot.
4. Place the dock on a hard and flat floor (wood/tile/concrete etc.).
Keep at least 0.5 m (1.6 ft) of clearance on either side, 1.5 m (4.9 ft)
in front, and 1 m (3.3 ft) above. Check the location has good WiFi
then plug it in.
≥ 0.5 m (1.6 ft)
≥ 1.5 m (4.9 ft)
11
≥ 1 m (3.3 ft)
≥ 0.5 m (1.6 ft)