Page 1
Roborock Flexi Pro Wet and Dry Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
English Contents 03 Safety Information 06 International Symbols Explanation 06 FCC Statement 08 Product Introduction English 08 Product Installation Français 08 Connecting to the App 09 Instructions for Use Español 10 Routine Maintenance 11 Basic Parameters 12 Common Issues 13 Environmental Protection Description 13 Holiday Energy Saving Function...
Safety Information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING To reduce the risk of fire, electric shock or injury: Do not use outdoors or on wet surfaces when charging.
Page 4
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery;...
Page 5
WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance –...
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including inter-ference that may cause undesired operation. Correspondence of the responsible party in USA Company Roborock Technology Co. Address ROOM 1227, 12TH FLOOR, 1000 N. WEST STREET, WILMINGTON, DE 19801 Email support@roborock.com...
Page 7
Warning Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
A1–7—Clean Tank Release Product Installation 1. Download the App A1–8—Clean Tank A1–9—Cleaning Head Installing and Removing Search "Roborock" in the A1–10—Roller Cover Release App Store or Google Play the Handle A1–11—Roller Cover or scan the QR code to A1–12—Cleaning Head Searchlight B1–1—...
3. Add the Device prevent sewage from entering, and there will be no unlock the cleaning head. response when switching between modes. Open the Roborock app, tap “Scan to C2–2— Locked Standby and Power Off C2–3—...
Note: You can use the Roborock app to stop the gently push the tank inward until it Note: The frequency of replacement may vary with the automatic drying that initiates after the self-cleaning actual situation.
Basic Parameters Cleaning the Dirty Tank and Cleaning the Smart Active Filter Drive Wheels Vacuum Cleaner D1–1—Take out the dirty tank, pull out the Clean the smart active drive wheels regularly. cover, and take out the filter from the Model WD3D1A Cleaning the Cleaning Head cover.
There is an unpleasant smell during use. Clean the roller, dirty tank, and filter. Do not add detergent or disinfectants that are not recommended by Roborock to the clean tank, or spray such detergent or disinfectants on the floor. Cleaning creates a lot of bubbles.
Environmental Protection Description Removing the Battery * The following information applies only when disposing of the vacuum cleaner and should not be followed for day-to-day operations. The chemical substances contained in the built-in lithium-ion battery of this product can cause environmental pollution. Remove the battery before disposing of this product and hand it to a professional battery recycling facility for centralized disposal.
Need help?
Do you have a question about the Flexi Pro and is the answer not in the manual?
Questions and answers
Роборок флекси про при самоочистке на станции чрезмерная подача воды что вытекает с краёв. В чём может быть проблема и как с ней справиться?