All manuals and user guides at all-guides.com Table of Contents Parts and Setup .....................1 Safety ............................1 Service ............................1 Unpacking ..........................1 Packing List ..........................2 Scale Assembly ......................... 2 Key Explanation ........................3 Display Explanation ........................ 3 Getting Started ....................4 Basic Weighing .........................
− Breaking the tamper evident seal inside the scale base will void the warranty. − For warranty service, contact AWS at 1-866-643-3444. There is a One Year Limited Warranty starting from the date of purchase. UnPaCkinG − After unpacking the scale, please check to make sure there is no visible damage.
All manuals and user guides at all-guides.com Parts & Setup PaCkinG LiST Model No. Scale Platform Stainless Clear AC-Adapter Operating Base Sub-assembly Steel Plastic Manual Shroud Bowl HX-502 HX-3001 inSTaLLaTion When selecting a location to use the scale, keep these tips in mind: Do not use the scale close to air vents or other sources of drafts such as doors or windows.
All manuals and user guides at all-guides.com Parts & Setup Model kEy ExPLanaTion PNX-203 Power key PNX-202 Turn the scale on or off. ON/OFF UNIT PNX-602 PNX-2002 Unit key PNX-1001 TARE ZERO Change the displayed weighing unit. ON/OFF UNIT PNX-2001 ON/OFF UNIT PNX-6001...
All manuals and user guides at all-guides.com Getting Started baSiC WEiGhinG FUnCTionS Preparation − Turn the scale on: Press (ON/OFF) Key. Warm up time: To ensure proper operation, allow the scale to warm up according to the warm-up times listed in the chart below: Model Warm-up Time hx-Series...
All manuals and user guides at all-guides.com Calibration Calibration (after warming up) Action Description Press [ ON/ 1. Power off the scale OFF ] Press and 2. While holding the UNIT key, tap the ON/OFF key to turn the scale Hold [UNIT] on.
All manuals and user guides at all-guides.com Function Setting Mode Function Setting Mode You may use the Function Setting Mode to change the scales operating settings. Action Description Press 1. Press ON/OFF to turn the scale OFF. [ ON/OFF ] Press and Hold 2.
All manuals and user guides at all-guides.com Error Codes Error Description The scale is currently overloaded. Remove the excess weight to Err-0 prevent damaging the load cell. Err-b Low battery. Replace the batteries. Err-2 Platform is not secure. Check to make sure that the platform is installed correctly.
All manuals and user guides at all-guides.com Specifications Unit Conversions Unit Symbol Unit Conversion Rate Gram Ounce 0.03527396200 Kilogram 0.00100000000 Pound 0.00220462260 Specifications Model Capacity Readability Repeat- Linearity Oper. Pan Size Overall ability Temp Dimensions 5.7 x 5.7 in. HX-502 500g 0.01g ±2d...
Need help?
Do you have a question about the HX Series and is the answer not in the manual?
Questions and answers