Fujitsu UTY-VBGX Instruction Manual page 144

BACnet Gateway for VRF System
8 Configuration Tool for BACnet Gateway (UTY-VBGX)
8.1 Introduction
The Configuration Tool for BACnet Gateway is a Windows
monitor and configure the UTY-VBGX gateway.
In order to install the software, simply execute the installer within the USB memory stick supplied with this product
and follow instructions on the wizard.
Note: Screen design described in the following chapters may slightly change depending on the version of
the software.
8.2 Welcome screen
From the welcome screen, access is granted to: the Fujitsu General Limited Website, start a new project, load a
previous project from our computer or get the current project running on the gateway.
1. Create New Project
When pressing this button, you will be directed to the connection view. More information can be found in 8.3
2. Load Project
Use this option to select a previous project you have been working with and it is already stored in your PC or
an accessible storage device.
3. Get Project from Device
Use this option to get the current configuration running on the gateway. Notice that to do that, you need to be
connected to the gateway.
•
IP connection: This requires Ethernet connection to the gateway and also knowing the connection
password. More information about the password can be found in section 8.4.1.
•
USB connection: This requires USB connection to the gateway.
®
Figure 8.1 Welcome screen
Copyright© 2021 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.4.0 eng
7/ 8.1/ 10 compatible software developed specifically to
144/159