Find the correct viewing
channel
1
Press
to turn on the Home Theater
System.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your TV,
then press the Channel Down button
until you see the Philips screen.
•
Press
SOURCE button repeatedly
on the remote control of your TV.
Tip
•
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO,
HDMI etc. See the TV user manual on how to select
the correct input on the TV.
Select menu display language
Note
•
Skip this setting if this Home Theater System is
connected to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language as per
your TV setting.
1
Press DISC .
2
Press
SETUP .
» [General Setup] menu is displayed.
3
Press .
4
Press
to select [OSD Language] in the
menu, then press .
•
The language options are different
depending on your country or
region. It may not correspond to the
illustration shown here.
5
Press
to select a language, then press
OK .
Tip
•
You can set the default language for DVD disc menu
(see 'Adjust settings' > 'Preferences' > [Disc Menu] ).
ไทย
EN
19