Philips HTS3377/51 User Manual page 37

[EasyLink Setup]
If this Home Theater System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the following
commands simultaneously:
Option Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select [Off] .
[One When you press PLAY , the TV and
Touch Home Theater System are turned
Play] on. Disc play starts if there is a disc
in the Home Theater System.
To disable this feature, select [Off] .
[One If you press and hold STANDBY
Touch for at least 3 seconds, the Home
Standby] Theatre System and all the HDMI
CEC devices switch to standby
simultaneously.
To disable this feature, select [Off] .
[System When you play audio that is
Audio routed from the connected
Control] devices, this Home Theater System
switches to the corresponding
audio source automatically.
To enable this feature, select [On] .
Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
[Audio When you map the audio input
Input correctly, this Home Theater
Mapping] System switches to the audio from
the played device automatically.
Note
•
You must turn on the HDMI CEC operations on the
TV/devices before you can enjoy the EasyLink controls.
See the TV/devices manual for details.
•
Philips does not guarantee 100% interoperability with
all HDMI CEC compliant devices.
38 EN
[Disc Lock]
Sets play restriction for a speciÀ c discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
• [Lock] – Restricts access to the current
disc. Once activated, a password is needed
to unlock and play the disc.
• [Unlock] – Plays all discs.
Tip
•
You can set or change the password (see 'Adjust
settings' > 'Preferences' > [Password] ).
[Display Dim]
Changes the brightness level of the display
panel on this Home Theater System.
• [100%] – Normal brightness.
• [70%] – Medium brightness.
• [40%] – Dimmest display.
[OSD Language]
Selects the default on-screen menu language.