Get Started; Insert The Remote Control Batteries - Philips HTS3377/51 User Manual

4 Get started

Insert the remote control
batteries
1
Slide the battery cover off the back of the
remote control.
2
Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3
Slide the cover back into position.
Note
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
•
Batteries contain chemical substances, they should be
disposed off properly.
18 EN
Control a play source
1
Press RADIO , USB or DISC button to
select the source you wish to control.
2
Select the desired function (for example ,
).
Navigate through the menu
1
Point the remote control directly at the
remote sensor on the Home Theater
System and select the desired function.
2
Press the following buttons on the remote
control to navigate through the on-screen
menus.
Button
OK
Action
Move up or down
Move left or right
ConÀ rm a selection
Enter numbers